MUTOH ValueJet - Page 231

ValueJet 1304 Service manual
5-61 AP-74109 Rev 1.1
(5) Ink Not-filled Flag
This updates the ink parameter. The setting items are as follows.
• User/: Charge; Cleaned, Ink not charged
• User/Init:Not Charge; Not Cleaned, Ink not charged
• User/Init:Charge; Cleaned, Ink charged
NOTE
When selecting "Reset", be sure to install the cartridge.
When any parameter has been changed
[Enter] key
[Enter] key
Change the value by pressing [+] or [-] key
”User/ : Charge”
”User/Init: Not Charge”
”User/Init: Charge”