ValueJet 1304 Service manual
AP-74109 Rev 1.1 7-14
(4) Setting Language
You can select either Japanese or English for menu and message display.
If it is changed, the setting will be available by re-launch the software.
Follow the steps below to change the setting.
(5) Confirming IP Address of the Printer
1. Select desired language from [Setup (S)] -
[Language (L)] of main screen.
2. In the Language Check window, click “OK“
The software quits automatically.
1. Launch “Mutoh Maintenance Engineer
Assistant” from the shortcut on the desk top.
2. Click [Setup (S)] on the main screen.
To Next Page
Loading...
