MUTOH ValueJet User Manual

ValueJet 1304 Service manual
9-71 AP-74109 Rev 1.1
2 "Packet communication
error" is displayed while
transferring data.
6. Can PC communicate
with other LAN
device(s) through the
network?
Yes: Connect PC to other
device(s) with LAN cable
and type ping command to
confirm the connection is
linked.
No: PC may be damaged.
-
3 "Error is received (???):
Buffer overflow." is
displayed.
Firmware file size is too
large. Confirm that the
transferred firmware is a
correct one.
Short-period buzzer
sounds repeatedly and
LCD panel displays the
following messages while
LEDs for Roll Paper / Cut
Paper, Color /
Monochrome flashes at
the same time.
Transfer failed
Data format error
Press any key other than
Power button to stop the
buzzer sound.
Press any key other than
Power button again to set
the printer for firmware
installation status.
"7.4 PF
Speed
Reduction Belt
Tension
Adjustment"
p.7-32
Table 9-14 Troubleshooting For MUTOH Service Assistance (Continued)
No. Symptom Check Item Action Reference

MUTOH ValueJet Specifications

General

Technology	Piezo Inkjet
Ink Type	Eco-solvent ink
Print Resolution	Up to 1440 dpi
Resolution	Up to 1440 dpi
Ink Colors	CMYK, White
Media Width	64 inches
Interface	USB, Ethernet
Operating Systems	Windows