2.2 Troubleshooting with Error Messages VJ628XE-M-00
2.2.3 Errors Requiring Reboot 31
20 E141Err
Platen heat Th.
An anomaly is detected
in Platen Thermistor.
1. Platen Thermistor connector may be
malfunctioning.
2. Platen Thermistor may be disconnecting.
3. HEATER DRIVE board may be
malfunctioning.
1. Make sure to connect thermistor connector
securely.
2. Replace Thermistor relay.
3. Replace DRIVE board.
"3.11.6Replacing HEATER
DRIVE Board
21 E 154 Err
AC Volt. Low
Interception of the
power-supply to a
printer or the supply
voltage decreased.
1. AC cable may have unplugged.
2. Instantaneous power failure may have
occurred.
3. Power board may be damaged.
Plug AC cable securely.
Operation Manual
Reboot the printer.
Operation Manual
Replace Power board.
"3.5.1Replacing Power Board
22 E227 Err
Heater SSR
This indicates that
“Heater Off “ is not
worked.
1. HEATER DRIVE board may be
malfunctioning.
Replace HEATER DRIVE Board.
"3.11.6Replacing HEATER
DRIVE Board
Table 2-4 Symptoms and Check Items for Mechanical Serious Errors(Continued)
No. Message Event/symptom Check item Action Reference
To Next Page