Page | 471
Certain projectors provide a ‘low latency mode’ to disable features of the unit
that carry a heavy toll in latency. Enabling this mode can make positioning
the projector slightly more challenging (as you may sacrifice some ability to
position and scale the image using projector menu functions) -- but the
latency reduction can be very worthwhile.
Some cameras include features that add more latency than you would expect.
For instance, image stabilization (by definition) adds one field of latency and
sometimes more. Disable anything of that sort that you can.
Latency may be slightly lower for progressive sessions, so for lowest latency,
(genlocked) 720p cameras and session are theoretically ideal (again, for
genlocked sources, consider disabling TriCaster’s Frame Sync – see Section
8.2.3).
To Next Page
Loading...
