Oce PlotWave 900 User Manual

Copy with removed filing strips along the leading and trailing strip
1.
Open the “Sheet” card in the “Original” section.
2.
Press the “Remove strip” function key.
[155] Remove strip
3.
Adjust the values in mm for the trailing strip using the numeric or arrow keys.
4.
Press the “Remove strip” function key again.
5.
Adjust the values in mm for the leading strip using the numeric or arrow keys.
6.
Make other settings as required.
7.
Feed the original.
Copy with added filing strips along the leading and trailing strip
1.
Open the ‘Layout’ card in the ‘Print’ section.
2.
Press the “Add strip” function key.
[156] Add strip
3.
Adjust the values in mm for the trailing strip using the numeric or arrow keys.
4.
Press the “Add strip” function key again.
5.
Adjust the values in mm for the leading strip using the numeric or arrow keys.
6.
Make other settings as required.
7.
Feed the original.
Chapter 8 - Special copy and scan jobs 231
Scanning originals with filing strip

Oce PlotWave 900 Specifications