Oce PlotWave 900 User Manual

3.
Press the green knob inside the roll holder to release the locking mechanism and remove
the core from the holder.
[177] Remove the core from the holder
How to load a new media roll
1.
Place the new roll in the groove on the manual feed of the printer.
2.
Press the locking mechanism down and slide the roll holder from the left into the core
of the new roll.
3.
Position the roll between the correct format indicators and release the locking mechanism.
[178] Place the new roll on the roll holder
Chapter 11 - System maintenance 265
Replace/Load a roll of media

Oce PlotWave 900 Specifications