A10E/A28E/A28F Configuration Guide
Alpha-A28E(config-
remote)#download { bootstrap
| startup-config | system-
boot | fpga } { ftp
ip-
address user-name password
file-name
| tftp
ip-address
file-name
}
On the CO device, download files from
the FTP/TFTP server to the remote
device.
On the remote device, download files from the FTP/TFTP server to the remote device as
below.
Enter global configuration mode.
Alpha-A28E(config)#interface
interface-type interface-
number
Enter physical layer interface
configuration mode.
Alpha-A28E(config-
port)#download { bootstrap |
startup-config | system-boot
| fpga } { ftp
ip-address
user-name password file-name
| tftp
ip-address file-name
}
On the remote device, download files
from the FTP/TFTP server to the
remote device.
Uploading files from the remote device to the server
The system bootstrap file, system startup file, configuration files, and FPGA file can be
forwarded from the remote device to the server, which can be initiated by the CO device or
the remote device. If the CO device initiates this, it cannot upgrade multiple remote devices.
On the CO device, upload files from the remote device to the server as below.
Enter global configuration mode.
Alpha-A28E(config)#interface
interface-type interface-
number
Enter physical layer interface
configuration mode.
Alpha-A28E(config-
port)#remote-device
Enter remote configuration mode.
Alpha-A28E(config-
remote)#upload { startup-
config | system-boot } { ftp
ip-address user-name password
file-name
| tftp
ip-address
file-name
}
On the CO device, upload files from the
remote device to the server.
On the remote device, upload files from the remote device to the server as below.
To Next Page
Loading...