R&S FSW Series - Page 1243

Remote Commands
R&S
®
FSW
1243User Manual 1173.9411.02 ─ 43
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt.........................................................1252
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]...................................................... 1252
SYSTem:COMMunicate:PRINter:SELect<1|2>................................................................1252
DISPlay:LOGO <State>
Activates/deactivates the printout of the Rohde & Schwarz company logo at the top of
each page.
Parameters:
<State> 1 | 0 | ON | OFF
1 | ON
Logo is printed.
0 | OFF
Logo is not printed.
*RST: 1
Example:
DISP:LOGO OFF
Manual operation: See "Print Logo" on page 642
HCOPy:ABORt
This command aborts a running hardcopy output.
Example:
HCOP:ABOR
HCOPy:CONTent <arg0>
This command determines the type of content included in the printout.
This setting is independent of the printing device.
Parameters:
<arg0> WINDows | HCOPy
WINDows
Includes only the selected windows in the printout. All currently
active windows for the current channel (or "MultiView") are avail-
able for selection. How many windows are printed on a each
page of the printout is defined by HCOPy:PAGE:WINDow<1|2>:
COUNt on page 1250.
This option is not available when copying to the clipboard
(HCOP:DEST 'SYST:COMM:CLIP' or an image file (see
HCOPy:DEVice:LANGuage<1|2> on page 1246).
If the destination is currently set to an image file or the clipboard,
it is automatically changed to be a PDF file for the currently
selected printing device.
Managing Settings and Results