Data Management
R&S
®
FSW
642User Manual 1173.9411.02 ─ 43
Remote command:
HCOPy:CONTent on page 1243
Print Multiple Windows
Includes only the selected windows in the printout. All currently active windows for the
current channel (or "MultiView") are available for selection. How many windows are
printed on a single page of the printout is user-definable (see "Windows Per Page"
on page 649).
This option is only available when printing on a printer or to a PDF file (see "Destina-
tion" on page 647). If the Destination is currently set to an image file or the clipboard
for the selected printing device, it is automatically changed to be a PDF file.
Remote command:
HCOPy:CONTent on page 1243
HCOPy:PAGE:WINDow<1|2>:STATe on page 1251
HCOPy:PAGE:WINDow<1|2>:CHANnel:STATe on page 1250
Comment
Defines an optional comment to be included in the printout of the display. Maximum
120 characters are allowed. Up to 60 characters fit in one line. In the first line, a man-
ual line-feed can be forced at any point by entering "@".
The comment is printed in the top left corner of each printout page. If a comment
should not be printed, it must be deleted.
This setting is independent of the printing device.
Tip: The current date and time can be inserted automatically, see "Print Date and
Time" on page 643.
Remote command:
HCOPy:ITEM:WINDow<1|2>:TEXT on page 1247
Print Logo
Activates/deactivates the printout of the Rohde & Schwarz company logo in the upper
right corner.
This setting is independent of the printing device.
Remote command:
DISPlay:LOGO on page 1243
Print Page Count
Includes the page number for printouts consisting of multiple windows ("Print Multiple
Windows" on page 642).
This setting is independent of the printing device.
Remote command:
HCOPy:PAGE:COUNt:STATe on page 1247
Select Device 1/2
Selects the printing device to be configured.
Creating Screenshots of Current Measurement Results and Settings
To Next Page
Loading...
