Remote Commands
R&S
®
FSW
1251User Manual 1173.9411.02 ─ 43
HCOPy:PAGE:WINDow<1|2>:SCALe <arg0>
This command determines the scaling of the windows in the printout for HCOPy:
CONTent on page 1243.
Suffix:
<1|2>
.
irrelevant
Parameters:
<arg0> 1 | 0 | ON | OFF
1 | ON
Each window is scaled to fit the page size optimally, not regard-
ing the aspect ratio of the original display. If more than one win-
dow is printed on one page (see HCOPy:PAGE:WINDow<1|2>:
COUNt on page 1250), each window is printed in equal size.
("Size to fit")
0 | OFF
Each window is printed as large as possible while maintaining
the aspect ratio of the original display.
("Maintain aspect ratio")
*RST:
1
Example:
HCOP:PAGE:WIND2:SCAL 0
Manual operation: See "Scaling" on page 649
HCOPy:PAGE:WINDow<1|2>:STATe <arg0>, <arg1>, <arg2>
This command selects the windows to be included in the printout for HCOPy:CONTent
on page 1243.
Suffix:
<1|2>
.
irrelevant
Parameters:
<arg0> String containing the name of the channel.
For a list of available channel types use INSTrument:LIST?
on page 825.
<arg1> String containing the name of the existing window.
By default, the name of a window is the same as its index.
To determine the name and index of all active windows in the
active channel, use the LAYout:CATalog[:WINDow]? query.
<arg2> 1 | 0 | ON | OFF
1 | ON
The window is included in the printout.
0 | OFF
The window is not included in the printout.
*RST: 1
Example:
HCOP:PAGE:WIND2:STAT 'IQ Analyzer','1',1
Managing Settings and Results
To Next Page
Loading...
