R&S FSW Series - Page 1249

Remote Commands
R&S
®
FSW
1249User Manual 1173.9411.02 ─ 43
Parameters:
<arg0> *RST: 4.23 mm
Example:
HCOP:PAGE:MARG2:RIGH 2
Manual operation: See "Margins" on page 649
HCOPy:PAGE:MARGin<1|2>:TOP <arg0>
This command defines the margin at the top of the printout page on which no elements
are printed. The margins are defined according to HCOPy:PAGE:MARGin<1|2>:UNIT
on page 1249.
Suffix:
<1|2>
.
1|2
Printing device.
Parameters:
<arg0> *RST: 4.23 mm
Example:
HCOP:PAGE:MARG2:TOP 2
Manual operation: See "Margins" on page 649
HCOPy:PAGE:MARGin<1|2>:UNIT <arg0>
This command defines the unit in which the margins for the printout page are config-
ured.
Suffix:
<1|2>
.
1|2
Printing device.
Parameters:
<arg0> MM | IN
MM
millimeters
IN
inches
*RST: MM
Example:
HCOP:PAGE:MARG2:BOTT 2
Manual operation: See "Margins" on page 649
HCOPy:PAGE:ORIentation<1|2> <arg0>
The command selects the page orientation of the printout.
The command is only available if the output device is a printer or a PDF file.
Suffix:
<1|2>
.
1|2
Printing device.
Managing Settings and Results