R&S FSW Series - Page 1320

Remote Commands
R&S
®
FSW
1320User Manual 1173.9411.02 ─ 43
<Parameter> Optional SCPI parameter.
String containing the name of a parameter that you can syn-
chronize.
Return values:
<SynchronizableParameter>Comma-separated list of parameters.
No parameters provided
Parameters that can be synchronized for all channels
Channel name provided
Parameters that can be synchronized for the selected channel
Parameter and channel name provided
Parameters that can be synchronized with the specified parame-
ter for the selected channel.
Example:
INST:COUP:USER:ELEM:LIST?
Result: all parameters that can be coupled:
'AC DC Coupling', 'Attenuation', 'Center
Frequency', 'Display Lines', 'Frequency Marker
1',...
Example:
INST:COUP:USER:ELEM:LIST? 'Spectrum'
Result: all parameters that can be coupled in the 'Spectrum'
channel:
'AC DC Coupling','Attenuation','Center
Frequency','Display Lines',...
Example:
INST:COUP:USER:ELEM:LIST? 'Spectrum',
'Attenuation'
Result: all parameters that can be coupled to 'Attenuation' in the
'Spectrum' channel:
'Attenuation'
(Attenuation is the only parameter that can be coupled to attenu-
ation.)
Usage: Query only
Manual operation: See "Coupling Element 1 / Coupling Element 2" on page 725
INSTrument:COUPle:USER<uc>:INFO
This command queries additional information about the specified user-defined parame-
ter coupling.
Suffix:
<uc>
.
Index of a user-defined parameter coupling. Which indexes are
available is defined by INSTrument:COUPle:USER<uc>:
NUMBers:LIST?.
Return values:
<Information> String containing the message as displayed in the coupling man-
ager.
If the coupling message contains no message, an empty string
is returned.
Configuring the R&S FSW