R&S FSW Series - Page 261

Measurements and Results
R&S
®
FSW
261User Manual 1173.9411.02 ─ 43
Multi-standard radio (MSR) measurements allow you to perform SEM tests on multiple
carriers using different digital standards.
For details, see Chapter 7.6.4.4, "Multi-Standard Radio (MSR) SEM Measurements",
on page 246.
Band Category
............................................................................................................ 261
Base Station Class......................................................................................................262
Base Station Maximum Output Power........................................................................ 262
Bands..........................................................................................................................262
Base Station RF Bandwidth........................................................................................ 262
Carrier Adjacent to RF Bandwidth Edge..................................................................... 262
Power Gsm Carrier..................................................................................................... 263
Apply to SEM.............................................................................................................. 263
Band Category
Defines the band category for MSR measurements, i.e. the combination of available
carriers to measure.
"BC1"
LTE FDD and W-CDMA
"BC2"
LTE FDD, W-CDMA and GSM/EDGE
"BC3"
LTE TDD and TD-SCDMA
Remote command:
[SENSe:]ESPectrum<sb>:MSR:BCATegory on page 944
Spectrum Emission Mask (SEM) Measurement