To Next Page

To Previous Page

Measurements and Results

R&S

FSW

263User Manual 1173.9411.02 ─ 43

Power Gsm Carrier

Defines the power of the GSM carrier (if available, see "Carrier Adjacent to RF Band-

width Edge" on page 262). Possible values are from 0 dBm to 100 dBm in 1 dB steps.

This setting is only available for Band Category2.

This setting is required to calculate the SEM limits according to standard 3GPP 37.141

V12.2.0.

Remote command:

[SENSe:]ESPectrum<sb>:MSR:GSM:CARRier on page 945

Apply to SEM

Configures the SEM sweep list according to the specified MSR settings.

Remote command:

[SENSe:]ESPectrum<sb>:MSR:APPLy on page 943

7.6.5.6 Standard Files

Access: "Overview" > "Select Measurement" > "Spectrum Emission Mask" > "Stan-

dard Files"

You can save the current measurement settings as a user-defined standard (XML file),

or load stored measurement settings. Furthermore, you can delete an existing settings

file.

For details, see Chapter 7.6.6.1, "How to Manage SEM Settings Files", on page 270.

Spectrum Emission Mask (SEM) Measurement

R&S FSW Series User Manual

Questions and Answers: