R&S FSW Series User Manual

Common Measurement Settings
R&S
®
FSW
395User Manual 1173.9411.02 ─ 43
Remote command:
SYSTem:COMMunicate:GPIB:RDEVice:GENerator<gen>:ADDRess on page 1100
SYSTem:COMMunicate:TCPip:RDEVice:GENerator<gen>:ADDRess
on page 1101
Reference
Selects the internal R&S FSW or an external frequency reference to synchronize the
R&S FSW with the generator (default: internal).
Remote command:
SOURce<si>:EXTernal<gen>:ROSCillator[:SOURce] on page 1099
Edit Generator Setup File
Displays the setup file for the currently selected Generator Type in read-only mode in
an editor.
Although the existing setup files are displayed in read-only mode in the editor, they can
be saved under a different name (using "File > SaveAs").
Be careful, however, to adhere to the required syntax and commands. Errors are only
detected and displayed when you try to use the new generator (see also "Displayed
Information and Errors" on page 392).
For details, see "Generator Setup Files" on page 386.
Frequency Min/ Frequency Max
For reference only: Lower and upper frequency limit for the generator.
Level Min/ Level Max
For reference only: Lower and upper power limit for the generator.
Measurement Settings
Access: [INPUT/OUPUT] > "External Generator Config" > "Measurement Configura-
tion" tab
Data Input and Output

R&S FSW Series Specifications

General

Brand	R&S
Model	FSW Series
Category	Measuring Instruments
Language	English