Data Management
R&S
®
FSW
633User Manual 1173.9411.02 ─ 43
Startup Recall..............................................................................................................633
Selecting Storage Location - Drive/ Path/ Files...........................................................633
File Name....................................................................................................................634
Comment.....................................................................................................................634
Startup Recall
Activates or deactivates the startup recall function. If activated, the settings stored in
the selected file are loaded each time the instrument is started or preset. If deactivated,
the default settings are loaded.
Note that only instrument settings files can be selected for the startup recall function,
not "Channel" files.
Remote command:
MMEMory:LOAD:AUTO on page 1238
Selecting Storage Location - Drive/ Path/ Files
Select the storage location of the file on the instrument or an external drive.
The default storage location for the SEM settings files is:
C:\Program Files (x86)\Rohde-Schwarz\FSW\<version>\sem_std.
Note: Saving instrument settings in secure user mode.
In secure user mode, settings that are stored on the instrument are stored to volatile
memory, which is restricted to 256 MB. Thus, a "memory limit reached" error can occur
although the hard disk indicates that storage space is still available.
Storing and Recalling Instrument Settings and Measurement Data
To Next Page
Loading...
Need help?
General
