R&S FSW Series - Page 678

General Instrument Setup
R&S
®
FSW
678User Manual 1173.9411.02 ─ 43
Stored transducer settings
When storing and recalling transducer settings, consider the information provided in
"Saving and recalling transducer and limit line settings" on page 626.
● Transducer Management...................................................................................... 678
● Transducer Factors............................................................................................... 680
12.3.2.1 Transducer Management
Access: [Setup] > "Transducer"
The settings required to manage all transducer lines on the instrument are described
here.
For the transducer line overview, the R&S
FSW searches for all stored transducer lines
with the file extension .TDF in the
C:\Program Files (x86)\Rohde-Schwarz\FSW\<version>\trd directory.
The overview allows you to determine which transducer lines are available and can be
used for the current measurement.
For details on settings for individual lines see Chapter 12.3.2.2, "Transducer Factors",
on page 680.
For instructions on configuring and working with transducers see Chapter 12.3.4, "How
to Configure the Transducer", on page 684.
Transducers