R&S
®
CMW 500 GSM Applications
GSM Command Reference
Operating Manual 1202.3986.32 – 03 273
<Limit>, Range: -100 dB to 0 dB
Def. value: -30 dB
Def. unit: dB
<Stat Current>,
<Stat Average>,
<Stat Max>
ON: Apply limit to the Current, Average, Max values
OFF: Do not apply limit
Def. value: ON
Characteristics Firmware version V1.00
CONFigure:GSM:MEAS<i>:MEValuation:LIMit:EPSK:IQIMbalance
<Limit>, <Stat Current>, <Stat Average>, <Stat Max>
Defines and activates upper limits for the I/Q imbalance values.
<Limit>, Range: -100 dB to 0 dB
Def. value: -20 dB
Def. unit: dB
<Stat Current>,
<Stat Average>,
<Stat Max>
ON: Apply limit to the Current, Average, Max values
OFF: Do not apply limit
Def. value: ON
Characteristics Firmware version V1.00
CONFigure:GSM:MEAS<i>:MEValuation:LIMit:EPSK:TERRor
<Limit>, <Stat Current>, <Stat Average>, <Stat Max>
Defines and activates upper limits for the timing error.
<Limit>, Range: -1000 Sym to 1000 Sym
Def. value: 0 Sym
Def. unit: Sym
<Stat Current>,
<Stat Average>,
<Stat Max>
ON: Apply limit to the Current, Average, Max values
OFF: Do not apply limit
Def. value: ON
Characteristics Firmware version V1.00
CONFigure:GSM:MEAS<i>:MEValuation:LIMit:EPSK:FERRor
<Limit>, <Stat Current>, <Stat Average>, <Stat Max>
Defines and activates upper limits for the frequency error.
<Limit>, Range: 0 to 999 Hz
Def. value: 90 Hz
Def. unit: Hz
<Stat Current>,
<Stat Average>,
<Stat Max>
ON: Apply limit to the Current, Average, Max values
OFF: Do not apply limit
Def. value: ON
To Next Page
Loading...
