R&S
®
CMW 500 Getting Started
Basic Tasks
Operating Manual 1202.3986.32 – 03 30
To access and activate control elements in dialogs:
Access the dialog using one of the methods
described in Accessing Dialogs.
Use the cursor down/up keys on the external
keyboard to step forth and back through the active
elements in the dialog. Use the cursor left/right keys
to change between menu levels or step to the
first/last entry in a list.
Press "ENTER" or "Return" to activate/deactivate a
control element or confirm and entry.
Use the cursor keys to select a value from a pull-
down list.
A tooltip shows the allowed range for numeric input
values.
To enter characters and numeric values:
... ...
Use the data entry keys to enter characters, numbers, and
signs in an active input field.
Use the dot key to enter the decimal point of a numeric
value.
Use the minus key to change the sign of the entered
numeric value. Press the minus key for a second time to
cancel the effect of the first entry.
Use the cursor up/down keys to increment/decrement
numbers. Use the cursor left/right keys to move the cursor
within a field, e.g. if you wish to change the different digits of
a decimal number separately.
Press "BACKSPACE" to correct an entry.
Press "ENTER" or "Return" to confirm an entry and de-
activate the input field.
2.1.6 Task Bar
The task bar is a hotkey bar across the bottom of the display. The keys in the task bar
give direct access to generator or measurement applications.
To Next Page
Loading...
