Rohde & Schwarz CMW 500 - Fetch:gsm:meas<I>:Mevaluation:sswitching; Fetch:gsm:meas<I>:Mevaluation:trace:sswitching:frequency; Read:gsm:meas<I>:Mevaluation:sswitching; Read:gsm:meas<I>:Mevaluation:trace:sswitching:frequency

R&S
®
CMW 500 GSM Applications
GSM Command Reference
Operating Manual 1202.3986.32 – 03 292
FETCh:GSM:MEAS<i>:MEValuation:TRACe:SSWitching:FREQuency?
READ:GSM:MEAS<i>:MEValuation:TRACe:SSWitching:FREQuency?
Returns the maximum burst power measured at a series of frequencies. The
frequencies are determined by the offset values defined via the command
CONFigure:GSM:MEAS<i>:MEValuation:SSWitching:FOFFsets. All defined
offset values are considered (irrespective of their activation status).
Returned values
<Reliability>, Reliability indicator
<Pow Offset -19>,
...,
<Pow Offset -0>,
<Pow Carrier>,
<Pow Offset +0>,
...,
<Pow Offset +19>
<Pow Offset +/-n> refers to the maximum burst power at the
carrier frequency +/- the frequency offset value number n.
Range: -100 dBm to 100 dBm
Def. unit: dBm
Characteristics Firmware version V1.00
SCPI: Query only
For additional information concerning syntax elements and returned values refer to
Multi Evaluation Measurement Commands.
FETCh:GSM:MEAS<i>:MEValuation:SSWitching?
READ:GSM:MEAS<i>:MEValuation:SSWitching?
Returns general spectrum switching frequency results.
Returned values
<Reliability>, Reliability indicator
<Out of Tol>, Percentage of measurement intervals / bursts of the statistic
count
(CONFigure:GSM:MEAS<i>:MEValuation:SCOunt:SSWitc
hing) exceeding the specified limits, see Limits (Spectrum
Switching).
Range: 0 % to 100 %
Def. unit: %
<Carrier Power> Measured carrier output power (reference power)
Range: -100 dBm to +100 dBm
Def. unit: dBm
Characteristics Firmware version V1.00
SCPI: Query only
For additional information concerning syntax elements and returned values refer to
Multi Evaluation Measurement Commands.
深圳德标仪器 135-1095-0799