R&S
®
CMW 500 Preparing for Use
Putting the Instrument into Operation
Operating Manual 1202.3986.32 – 03 12
WARNING
Danger of injury
The feet may fold in if they are not folded out completely or if the instrument is shifted.
The feet may break if they are overloaded.
Fold the feet completely in or completely out to ensure stability of the instrument and
personal safety. To avoid injuries, never shift the instrument when its feet are folded
out.
The overall load (the instrument's own weight plus that of the instruments stacked on
top of it) on the folded-out feet must not exceed 500 N.
Place the instrument on a stable surface. Secure the instruments stacked on top of it
against slipping (e.g. by locking their feet on the top front frame).
When the instrument is standing on its folded-out feet, do not work under the
instrument and do not put anything under it, otherwise injuries or material damage
could occur.
The instrument can be used in each of the positions shown here.
1.3.4 Mounting in a 19" Rack
The instrument can be mounted in 19" racks using a ZZA-411 (order number
1096.3283.00) adapter. Please note the mounting instructions supplied with the rack
adapter.
To Next Page
Loading...
