R&S
®
CMW 500 Getting Started
Basic Tasks
Operating Manual 1202.3986.32 – 03 29
mouse or an external keyboard.
To use softkeys and hotkeys:
Access the dialog using one of the methods described in
Accessing Dialogs.
Press the associated front panel key to activate a softkey.
The hotkeys which depend on the active softkey are displayed
across the bottom of the screen.
Press the front panel key below a hotkey to activate the
hotkey.
Use the rotary knob, the cursor keys, or the data entry keys
to select parameters or enter data.
To access and activate control elements in dialogs:
Access the dialog using one of the methods
described in Accessing Dialogs.
Turn the rotary knob to the clockwise or
counterclockwise to step forth and back through the
active elements in the dialog. Alternatively, use the
cursor up/down keys.
Press the rotary knob or press "ENTER" to activate
a control element.
Turn the rotary knob or use the cursor keys to select
a value from a pull-down list.
2.1.5 Using an External Keyboard
Control of the Graphical User Interface by means of an external keyboard can be a
convenient alternative for mouse or front panel key control.
To Next Page
Loading...
