Rohde & Schwarz CMW 500 - Fetch:gsm:meas<I>:Mevaluation:trace:perror:average; Fetch:gsm:meas<I>:Mevaluation:trace:perror:current; Fetch:gsm:meas<I>:Mevaluation:trace:perror:maximum; Phase Error Measurement Results (Trace)

R&S
®
CMW 500 GSM Applications
GSM Command Reference
Operating Manual 1202.3986.32 – 03 287
<RMS Min/Max>, Range: –100.0 % to +100.0 %
Def. unit: %
<RMS Std Dev>, Range: 0 % to 50 %
Def. unit: %
<Peak Current>, Range: –100.0 % to +100.0 %
Def. unit: %
<Peak Average>, Range: 0 % to +100.0 %
Def. unit: %
<Peak Min/Max>, Range: –100.0 % to +100.0 %
Def. unit: %
<Peak Std Dev>, Range: 0 % to 50 %
Def. unit: %
<95th Percentile> Range: 0 % to 100 %
Def. unit: %
Characteristics Firmware version V1.00
SCPI: Query only
For additional information concerning syntax elements and returned values refer to
Multi Evaluation Measurement Commands.
8.4.2.20 Phase Error Measurement Results (Trace)
The following commands return the phase error trace results of the multi-evaluation
measurement for the "measured slot"
(CONFigure:GSM:MEAS<i>:MEValuation:MSLots).
FETCh:GSM:MEAS<i>:MEValuation:TRACe:PERRor:CURRent?
FETCh:GSM:MEAS<i>:MEValuation:TRACe:PERRor:AVERage?
FETCh:GSM:MEAS<i>:MEValuation:TRACe:PERRor:MAXimum?
READ:GSM:MEAS<i>:MEValuation:TRACe:PERRor:CURRent?
READ:GSM:MEAS<i>:MEValuation:TRACe:PERRor:AVERage?
READ:GSM:MEAS<i>:MEValuation:TRACe:PERRor:MAXimum?
Returns the values of the phase error traces. The results of the current, average and
minimum/maximum traces can be retrieved.
Returned values
<Reliability>, Reliability indicator
深圳德标仪器 135-1095-0799