Rohde & Schwarz CMW 500 - Page 427

R&S
®
CMW 500 WiMAX Applications
WiMAX Command Reference
Operating Manual 1202.3986.32 – 03 407
READ:WIMax:MEAS<i>:MEValuation:SFOLower:MAXimum?
READ:WIMax:MEAS<i>:MEValuation:SFOLower:MINimum?
Returns the spectral flatness of the outer lower sub-carriers; see Table of Results. The
current, average, maximum and minimum values can be retrieved.
Returned values
<Reliability>, Reliability indicator
<Flatness Out Low> Range: –100.0 dB to +100.0 dB
Def. unit: dB
Characteristics Firmware version V1.00
SCPI: Query only
For additional information concerning syntax elements and returned values refer to
Multi Evaluation Measurement Commands.
FETCh:WIMax:MEAS<i>:MEValuation:SFIupper:CURRent?
FETCh:WIMax:MEAS<i>:MEValuation:SFIupper:AVERage?
FETCh:WIMax:MEAS<i>:MEValuation:SFIupper:MAXimum?
FETCh:WIMax:MEAS<i>:MEValuation:SFIupper:MINimum?
READ:WIMax:MEAS<i>:MEValuation:SFIupper:CURRent?
READ:WIMax:MEAS<i>:MEValuation:SFIupper:AVERage?
READ:WIMax:MEAS<i>:MEValuation:SFIupper:MAXimum?
READ:WIMax:MEAS<i>:MEValuation:SFIupper:MINimum?
Returns the spectral flatness of the inner upper sub-carriers; see Table of Results. The
current, average, maximum and minimum values can be retrieved.
Returned values
<Reliability>, Reliability indicator
<Flatness In Upp> Range: –100.0 dB to +100.0 dB
Def. unit: dB
Characteristics Firmware version V1.00
SCPI: Query only
For additional information concerning syntax elements and returned values refer to
Multi Evaluation Measurement Commands.
FETCh:WIMax:MEAS<i>:MEValuation:SFILower:CURRent?
FETCh:WIMax:MEAS<i>:MEValuation:SFILower:AVERage?
FETCh:WIMax:MEAS<i>:MEValuation:SFILower:MAXimum?
FETCh:WIMax:MEAS<i>:MEValuation:SFILower:MINimum?
READ:WIMax:MEAS<i>:MEValuation:SFILower:CURRent?
READ:WIMax:MEAS<i>:MEValuation:SFILower:AVERage?
READ:WIMax:MEAS<i>:MEValuation:SFILower:MAXimum?
深圳德标仪器 135-1095-0799