CLI Reference RNS&Track Configuration Commands
Define the timeout time of sending the packets.
icmp-echo destination-hostname
Use this command to set an ip rns object to send the icmp echo packets and to enter the ip rns icmp
echo configuration mode.
icmp-echo destination-hostname [ source-ipaddr ip-address ]
Set the destination IP address for the ICMP echo packets.
(Optional) Set the source IP address for the ICMP echo packets.
IP RNS configuration mode.
This command enables ip rns object to send icmp echo packets and the destination ip address is the
ip address configured by the user.
Ruijie(config-ip-rns)# icmp-echo 10.1.1.1
Use this command to define an ip rns operation object and to enter the ip-rns configuration mode. The
no form of this command is used to delete an ip rns object
no ip rns operation-number
Set the ip rns operation object number, in the range of 1 to 700.
To Next Page
Loading...
Need help?
General