Ruijie RG-S2600G-I Series - Page 1035

CLI Reference GRTD Configuration Commands
complete
Complete bootup test
Related
commands
Command
Description
show diagnostic bootup
level
Show the current bootup test level.
Platform
description
N/A
diagnostic event-log size
Use this command to set the number of diagnostic event records in global configuration mode,
ranging from 1 to 1000.
diagnostic event-log size size-value
no diagnostic event-log size
Parameter
description
Parameter
Description
size-value
Number of diagnostic event records
Default
The default number of diagnostic event records is 500.
Command
mode
Global configuration mode
Usage
guidelines
Use the diagnostic event-log size command to set the number of
diagnostic event records.
You can set the number of diagnostic event records to 1-1000.
Caution
This command is for the host only. All
diagnostic events on modules are stored
on the host.
Examples
Example 1: The following example sets the number of diagnostic
event records to 1000.
ruijie(config)#diagnostic event-log size 1000
ruijie(config)#
Example 2: The following example sets the number of diagnostic
event records to the default value.
ruijie(config)#no diagnostic event-log size
ruijie(config)#