CLI Reference GRTD Configuration Commands
The number of event records to be set
diagnostic monitor interval
Use this command to set the test interval for system health monitoring in global configuration
mode, with the second as the minimum unit.
diagnostic monitor interval [slot slot_id [sub_system subsys_id]] test {all | test-id | range
test-range} hh:mm:ss day day_count
no diagnostic monitor interval [slot slot_id [sub_system subsys_id]] test {all | test-id | range
test-range}
(Optional) Subsystem ID (value range: 0-1), whose
meaning is equivalent to cpu id in the show version
command.
test {all | test-id
|range
test-range}
Test items. all means all items; range means a
range, for example, from item m to item n.
Hour:minute:second, for example, 00:00:40
The default interval for ping tests is 20s.
Global configuration mode
Use the diagnostic monitor interval command to set the monitoring
interval for a specified test item in a module.
The number of days ranges from 0 to 20.
To Next Page
Loading...
Need help?
General