Ruijie RG-S2600G-I Series - Page 1138

CLI Reference VSU Configuration Commands
switch sw_id priority priority_num
Configure the priority of a switch in VSU.
show switch virtual
Show the domain ID, the ID and role of each
device.
Platform
Description
N/A
switch sw_id description
Configure the description of a switch in VSU. The no form of this command is used to empty the
descriptor.
switch sw_id description dev-name
no switch sw_id description
Parameter
Description
Parameter
Description
sw_id
Indicates the ID of the switch that needs to be configured with a
priority.
dev_name
Indicates the device name description
Default
Configuration
N/A
Command
Mode
config-vs-domain configuration mode
Usage
Guidelines
The command can be executed in the standalone and VSU modes. The configuration becomes valid
immediately in the VSU mode.
Configuration
Examples
#Example:
Ruijie(config)# switch virtual domain 1
Ruijie(config-vs-domain)# switch 1 description buildingA
Ruijie(config-vs-domain)# exit
Related
Commands
Command
Description
switch
Configure a switch ID.
show switch virtual
Show the domain ID, the ID and role of each
device.
Platform
Description
N/A