CLI Reference Guide SNMP Configuration Commands
snmp-server system-shutdown
Use this command to enable the SNMP system restart notification function in global configuration
mode. The no form of this command is used to disable the SNMP system notification function.
snmp-server system-shutdown
no snmp-server system-shutdown
Global configuration mode.
This command is used to enable the SNMP system restart notification function. The RGOS sends
the SNMP trap messages to the NMS to notify the system pending before the device is reloaded or
rebooted.
The example below enables the SNMP system restart notification function:
Ruijie(config)# snmp-server system-shutdown
snmp-server trap-format private
Use this command to set the SNMP Trap message to carry private fields in global configuration mode.
Use the no form of this command to restore the default setting.
snmp-server trap-format private
no snmp-server trap- format private
The information carries no private field.
To Next Page
Loading...
Need help?
General