Ruijie RG-S2600G-I Series - Page 264

CLI ReferenceInterface Configuration Commands MSTP Configuration Commands
Command Mode
Interface configuration mode
Usage Guide
-
Configuration
Examples
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# spanning-tree bpduguard enable
Related Commands
Command
Description
show spanning-tree interface
Show the STP configuration of an interface.
Platform Description
-
spanning-tree bpduguard
This command is used to enable the BPDU guard function on an interface. You can use the
enabled or disabled option of the command to enable or disable the BPDU guard function on
the interface.
spanning-tree bpduguard [ enabled | disabled ]
Parameter
Description
Parameter
Description
enabled
Enable BPDU guard on an interface.
disabled
Disable BPDU guard on an interface.
Defaults
Disabled
Command Mode
Interface configuration mode
Usage Guide
-
Configuration
Examples
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# spanning-tree bpduguard enable
Related Commands
Command
Description
show spanning-tree interface
Show the STP configuration of an interface.
Platform Description
-
spanning-tree compatible enable
This command is used to send the message selectively carried with MSTI according to the
interface attributes of current port to realize interconnection with other products.