Ruijie RG-S2600G-I Series - Page 265

CLI ReferenceInterface Configuration Commands MSTP Configuration Commands
spanning-tree compatible enable
no spanning-tree compatible enable
Parameter
Description
Parameter
Description
-
-
Defaults
Disabled
Command Mode
Interface configuration mode
Usage Guide
-
Configuration
Examples
Ruijie(config)# spanning-tree compatible enable
Related Commands
Command
Description
-
-
Platform Description
-
spanning-tree guard loop
This command is used to enable loop guard on an interface to prevent the root port or backup
port from generating loop as the result that they cannot receive bpdu. You can use the no
option of this command to disable the loop guard.
spanning-tree guard loop
no spanning-tree guard loop
Parameter
Description
Parameter
Description
-
-
Defaults
Disabled
Command Mode
Interface configuration mode
Usage Guide
-
Configuration
Examples
Ruijie(config)# spanning-tree guard loop
Related Commands
Command
Description
-
-