Ruijie RG-S2600G-I Series User Manual

CLI Reference Guide HTTP Service Configuration Commands
http update server
Use this command to configure the server address and port number for HTTP upgrade.
http update server { host-name | ip-address } [ port port-number ]
no http update server
Parameter
Description
Parameter
Description
host-name
Server's domain name
ip-address
Server's address
port-number
Server's port number, which ranges from 1 to 65535
Defaults
The default server address is 0.0.0.0 and port number is 80.
Command
Mode
Global configuration mode
Usage Guide
You can use this command to configure the server address and port number for HTTP upgrade.
During HTTP upgrade, the device will first seek to connect to the server address configured by this
command. If it fails to connect to the address, it will seek to connect to addresses in the local record. If
no address can be connected, the upgrade fails.
The system will record one or multiple addresses of upgrade server. These addresses cannot be
modified.
Users do not need to configure the server address as the local upgrade record file has
recorded possible upgrade server addresses.
To configure the server domain name, users need to enable the device’s DNS function
and configure the DNS server address.
Server address does not support IPV6.
Configuration
Examples
The following example configures the server address and port number for HTTP upgrade.
Ruijie#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)#http update server 10.83.132.1 port 90
Related
Commands
Command
Description
-
-
Platform
Description
N/A

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English