Ruijie RG-S2600G-I Series User Manual

CLI Reference IGMP Snooping Configuration Commands
Default
Disabled.
Command
mode
Global configuration mode.
Usage
guidelines
After globally enabling the IGMP querier, you must
enable the IGMP querier function in VLAN to effect
this command.
If the IGMP querier function is disabled globally, the
IGMP querier will be disabled in all VLANs.
Examples
The following example enables the IGMP querier
function on the device:
Ruijie(config)# ip igmp snooping querier
Related
commands
Command
Description
ip igmp snooping vlan
querier
Enable the querier
function in VLAN
Platform
description
Supported after release 10.4(3).
ip igmp snooping querier address
To enable the IGMP querier, you also need to specify a source IP address for query
packets. Execute the global configuration command of "ip igmp snooping querier address".
Use no form of this command to remove the source IP address configured.
ip igmp snooping querier address a.b.c.d
no ip igmp snooping querier address
Parameter
description
Parameter
Description
a.b.c.d
Source IP address of the
query packets.
Default
No source IP address is specified
Command
mode
Global configuration mode.
Usage
guidelines
After enabling IGMP querier, you also need to
configure a source IP address for query packets, so
that the device can send packets normally.
If no source IP address is specified in the VLAN

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English