Ruijie RG-S2600G-I Series - Page 542

CLI Reference IGMP Snooping Configuration Commands
expiry 60
Related
commands
Command
Description
ip igmp snooping vlan
querier timer expiry
Configure querier
expiration timer in
VLAN
Platform
description
Supported after release 10.4(3).
ip igmp snooping querier version
Currently, the IGMP Snooping querier supports IGMPv1 and IGMPv2. To specify the
version, execute the global configuration command of "ip igmp snooping querier version".
Use no form of this command to restore to the default setting.
ip igmp snooping querier version num
no ip igmp snooping querier
Parameter
description
Parameter
Description
num
IGMP version number
(1-2). Default value: 2.
Default
IGMPv2
Command
mode
Global configuration mode.
Usage
guidelines
If the IGMP querier version number has been
configured in the corresponding VLAN, the value
specified in VLAN will be used first.
Examples
The following example configures IGMP querier
version on the device:
Ruijie(config)# ip igmp snooping querier version 1
Related
commands
Command
Description
-
-
Platform
description
Supported after release 10.4(3).