Ruijie RG-S2600G-I Series - Page 544

CLI Reference IGMP Snooping Configuration Commands
Parameter
description
Parameter
Description
address
Default multicast source IP address (IP
address of the default multicast server)
Default
Disabled.
Command
mode
Global configuration mode.
Usage
guidelines
The source IP address check function takes effect globally. Once it is
enabled, only the IPMC streams from the specified IP address are
permitted. The device allows users to configure the source IP
address of all IPMC streams, called default multicast server. The
default server must be set as long as the source IP address check
function is enabled.
Examples
The following example shows how to enable the multicast source IP
address check function and configure a default source IP address.
Ruijie(config)# ip igmp snooping source-check default-server
192.168.4.243
Related
commands
Command
Description
Ip igmp snooping
limit-ipmc vlan server
Add an entry to the
source IP check table.
ip igmp snooping source-check port
The source port check function is used to permit one or several IPMC flows from the mroute port.
To configure the source port check function of IGMP snooping, execute the ip igmp
snooping source-check port command in the global configuration mode. The no form
of this command is used to disable the source port check function.
ip igmp snooping source-check port
no ip igmp snooping source-check port
Parameter
description
N/A.
Default
Disabled.
Command
mode
Global configuration mode.