Ruijie RG-S2600G-I Series - Page 802

CLI Reference NFPP Configuration Commands
Command
mode
NFPP configuration mode.
Usage
guidelines
The attack threshold shall be equal to or greater than the
rate-limit threshold.
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# arp-guard attack-threshold per-src-ip 2
Ruijie(config-nfpp)# arp-guard attack-threshold per-src-mac 3
Ruijie(config-nfpp)# arp-guard attack-threshold per-port 50
Related
commands
Command
Description
nfpp
arp-guard
policy
Show the rate-limit threshold
and attack threshold.
show nfpp arp-guard
summary
Show the configurations.
show nfpp arp-guard
hosts
Show the monitored host.
clear nfpp arp-guard
hosts
Clear the isolated host.
arp-guard enable
Use this command to enable the anti-ARP guard function globally.
arp-guard enable
Parameter
description
Parameter
Description
-
-
Default
Settings
Enabled.
Command
mode
NFPP configuration mode.
Usage
guidelines
N/A