CLI Reference NFPP Configuration Commands
Interface configuration mode.
The interface ICMP anti- attack configuration is prior to the
global configuration.
Ruijie(config)# interface G0/1
Ruijie(config-if)# nfpp icmp-guard enable
Enable the anti-ARP attack
function.
sho
w
nfpp
icmp
-guar
d
sum
mary
nfpp icmp-guard isolate-period
Use this command to set the isolate period in the interface configuration mode.
nfpp icmp-guard isolate-period {seconds | permanent}
Set the isolate period, in second. The
valid range is 0, or [30, 86400]. 0
indicates no isolation.
By default, the isolate period is not configured.
Interface configuration mode.
To Next Page
Loading...
