Ruijie RG-S2600G-I Series - Page 837

CLI Reference NFPP Configuration Commands
interface-id
Set the interface name and number.
ip-address
Set the IP address.
Default
Settings
N/A.
Command
mode
Privileged EXEC mode.
Usage
guidelines
Use this command without the parameter to clear all
monitored hosts.
Examples
Ruijie# clear nfpp icmp-guard hosts vlan 1 interface g0/1
Related
commands
Command
Description
icmp-guard
attack-threshold
Set the global attack threshold.
nfpp
icmp
-guar
d
polic
y
Set the limit threshold and attack
threshold.
sho
w
nfpp
icmp
-guar
d
host
s
Show the monitored host.
nfpp icmp-guard enable
Use this command to enable the ICMP anti-attack function on the interface.
nfpp icmp-guard enable
Parameter
description
Parameter
Description
-
-
Default
Settings
The ICMP anti-attack function is not enabled on the interface.