Ruijie RG-S2600G-I Series - Page 836

CLI Reference NFPP Configuration Commands
Parameter
description
Parameter
Description
ip
Set the IP address.
mask
Set the IP mask.
all
Delete the configurations of all trusted
hosts.
Default
Settings
N/A.
Command
mode
NFPP configuration mode.
Usage
guidelines
The administrator can use this command to set the trusted
host free from monitoring. The ICMP packets are allowed
to sent to the trusted host CPU without any rate-limit and
warning configuration. Configure the mask to set all hosts
in one network segment free from monitoring.
UP to 500 trusted hosts are supported.
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# icmp-guard trusted-host 1.1.1.0 255.255.255.0
Related
commands
Command
Description
sho
w
nfpp
icmp
-guar
d
trust
ed-h
ost
Show the configurations.
clear nfpp icmp-guard hosts
Use this command to clear the monitored host isolation.
clear nfpp icmp-guard hosts [vlan vid] [interface interface-id] [ip-address]
Parameter
description
Parameter
Description
vid
Set the VLAN ID.