Ruijie RG-S2600G-I Series - Page 846

CLI Reference NFPP Configuration Commands
range of 1-9999.
Default
Settings
The default scan threshold is 100, in 10 seconds.
Command
mode
NFPP configuration mode.
Usage
guidelines
N/A.
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# ip-guard scan-threshold 20
Related
commands
Command
Description
nfpp ip-guard
scan-threshold
Set the scan threshold on the
port.
show nfpp ip-guard
summary
Show the configurations.
ip-guard trusted-host
Use this command to set the trusted hosts free form monitoring.
ip-guard trusted-host ip mask
no ip-guard trusted-host {all | ip mask}
Parameter
description
Parameter
Description
ip
Set the IP address.
mask
Set the IP mask.
all
Delete the configurations of all trusted
hosts.
Default
Settings
N/A.
Command
mode
NFPP configuration mode.