CLI Reference Guide ACL Configuration Commands
It indicates the name of the ACL.
Interface configuration mode
This command is used to configure the secure interface channel.
Ruijie(config-if)#security access-group 1
It shows the current configuration information.
This command is not supported by routers.
security global access-group
Use this command to configure the global security channel.
security global access-group { id | name }
no security global access-group
Global configuration mode
Use this command to configure the global security channel.
Ruijie# security global access-group 1
Show configuration of current system.
To Next Page
Loading...
Need help?
General