Ruijie RG-S2600G-I Series User Manual

CLI Reference REUP Configuration Commands
Usage
guidelines
This command can be used to disable some VLANs from processing
MAC address update packets. VLANs disabled from processing MAC
address update packets can still recover downlink data transmission
of the uplink device using MAC address update packets, but the
capability to provide convergence on link failure will be degraded.
Examples
The following example configures VLANs processing MAC address
update packets:
Ruijie(config)# no mac-address-table move update receive vlan 20
Related
commands
Command
Description
mac-address-table
move update
receive
Enable REUP to receive MAC
address update packets.
mac-address-table move update transit
Use this command to enable REUP to transmit the mac-address-table update messages.
mac-address-table move update transit
no mac-address-table move update transit
Default
Disabled.
Command
mode
Global configuration mode.
Usage
guidelines
In order to reduce the link switchover and the loss of the downstream
data flow, it is necessary to enable the switch of receiving the MAC
address update messages on the uplink switch.
Examples
Ruijie(config)# mac-address-table move update transit
Related
commands
Command
Description
mac-address-table
move update
transit vlan
Enable REUP to transmit the mac-address-table
update messages.

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English