490
• If the printer is powered off, all log data will be lost.
• When <RU>,00 is set, the whole log buffer will be cleared.
• No log is recorded when code write is specified without print data.
[Format of [DC2]PK return data when RFID data log is enabled (normal state)]
02h
03h
Return 1’ (31h) if tag is successful.
Return 0’ (30h) if tag is failed.
Return UID.
Return error that shows
the character
Total number of data byte
Status
1: Print with tag write successful
0: Tag write failed and write with tag error
Error symbol
‘N’ : No error
‘D’ : UID read error
‘A’ : All errors
Parent topic RFID Command (CL4NX Only)