495
Parameters related to data format code (omissible)
Note:
• A parameter error will occur if df1: and df2: are specified together.
• df2: can be used only for FeliCa Lite.
IDm before setting: 3031323334353637
↓
Data format code: FFE0
↓
IDm after setting: 3031323334353637
df2: Data format
code case 2
Set a fixed 4-digit hexadecimal.
If this parameter is specified, the IDm of Polling response is changed as
shown below.
E.g.:
IDm before setting: 3031323334353637
↓
Data format code: FFE0
↓
IDm after setting: 03FEFFE034353637
If the data format code is changed, this area will be
overwritten to 03FE.
ID Parameters related to ID block random code (omissible)
eid: ID block random code Set a fixed 12-digit hexadecimal.
[Notes]
By specifying the parameters related to data format code (df1:, df2:) and parameters related to ID
block random code (eid:), the IDm of Polling response and ID block value are updated as shown
below.
Data
format
code
Case 1 (df1: specified
or df1: and df2: omitted)
Case 2 (df2: specified)
(Only when using FeliCa Lite)
D_ID
Block
IDd (16 digits)
PMm (16 digits)
IDm (16 digits)
PMm (16 digits)
Polling
Response
IDm (16 digits)
PMm (16 digits)
ID (upper bit 16 digits)
ID (lower bit 16 digits)
Copy the IDd of D_ID
block (4 digits)
Fixed value [03FE] (4 digits)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
