SATO CL6NX - Page 565

563
Symbol Parameter name Valid range
*Text format Maximum 256 digits
c Option data
("Option identifier" + ":" + "Data")
*Text format
Options identifier
RS: RSSI (Received Signal Strength Indicator)
MT: Module temperature
Data
Maximum 3 digits
[Return data format (when a command error occurs)]
[NAK]<15>
16
[Exception processing]
Exception conditionParameter name
A value outside the range is specified
Identifier Command error
Terminology Description
Command error The data received after a command error is determined is not considered as a
parameter of this command.
[Coding sample1]
[DC2]PJ,U1,NO (Specify EPC area)
[Coding sample2]
[DC2]PJ,U2,RS (Specify RSSI to TID area readout and option)
[Coding Sample 3]
[DC2]PJ,U1,U2,NO (Specifies EPC and TID area read)
[DC2]PJ,U3,U4,MT (Reads USER and PC/AFI area and specifies module temperature to option)
[Return status/ Format]
cc:d…d(,cc:d…d)
Symbol Name of Parameter Description
c Identifier EP: EPC area
TI: TID area
UD: USER area
PC: PC/AFI area
d Data