564
[Sample of status reply1]
■When EPC data“E0123456789ABCDEF0123456” is on Gen2 supported tag
[STX]24,E0123456789ABCDEF0123456[ETX]
[Sample of status reply 2]
■When TID data “E200680612345678”is on Gen2 supported tag and RSSI is 10dBm
[STX]22,E200680612345678,RS:10[ETX]
[Sample of status reply 3]
■To get both EPC and TID when EPC data “E0123456789ABCDEF123456” and TID data
“E200680612345678” are recorded
[STX]47,EP:E0123456789ABCDEF0123456,TI:E200680612345678[ETX]
[Sample of status reply 4]
■When failed to read EPC data that supports Gen2 tag
[STX]11,EPC_Tag_Err[ETX]
To Next Page
Loading...
