680
Setting name Setting range Default value
(Factory setting)
ASCII for 128 bit
Allow "0" ~ "9",
"A"～"F"
for A
～
H
A to H can be omitted.
SNMP IPv4 trap Destination3 AAA.BBB.CCC.DDD
Allow "0"
～
"255" for A
～
D
0.0.0.0
SNMP IPv6 trap Destination3 AAAA:BBBB:CCCC:DDDD:EEEE:FFFF:GGGG:HHHH
ASCII for 128 bit
A to H is "0" to "FFFF".
A to H can be omitted.
::
SNMP trap community Character string within 8-32 characters
* Encrypted data
trapcom
SNMP trap user name Character string within 8-32 characters
* Encrypted data
trapuser
SNMP trap engine ID Even number
10 digits to 64 digits
Number generated
from Unique code
SNMP trap security none
Authentication
Privacy (encrypted)
none
SNMP trap authentication
protocol
MD5
SHA
MD5
SNMP trap authentication
password
8 to 32 of character string
* Encrypted data
mypassword
SNMP trap Encryption protocol DES
AES
DES
SNMP trap Encryption
password
8 to 32 of character string
* Encrypted data
mypassword
LPD Enabled
Disabled
Enabled
FTP Enabled
Disabled
Disabled
FTP time-out "10" to "3600"(seconds) 300
[Disclaimer]
*1
Please note that port number 1-1023 is Well-known port. Please use the port on one's own
responsibility.
Our company assume no responsible for any failure arising from use.
Parent topic Basic Specifications (LAN)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
