679
Setting name Setting range Default value
(Factory setting)
SNMP read-only authentication
password
8 to 32 of character string mypassword
Protocol for SNMP read -only
authentication encryption
DES
AES
DES
SNMP read-write encryption
password
8 to 32 of character string mypassword
SNMP read-write 1|2c|3
1|2c
3
Disabled
1|2c|3
SNMP read-write community
name
The maximum of 32 character string private
SNMP read-write user name 8 to 32 of character string rwuser
SNMP read-write security none
Authentication
Privacy (with encryption)
none
SNMP read-write
authentication protocol
MD5
SHA
MD5
SNMP read-write
authentication password
8 to 32 of character string mypassword
SNMP read-write encryption
protocol
DES
AES
DES
SNMP read-write encryption
password
8 to 32 of character string mypassword
SNMP trap Enabled
Disabled
Disabled
SNMP trap version SNMPv1
SNMPv2c
SNMPv3
SNMPv1
SNMP trap Destinations Destination1
Destination2
Destination3
Destination1
SNMP trap IP Version IPv4
IPv6
IPv4
SNMP IPv4 trap Destination1 AAA.BBB.CCC.DDD
Allow "0"
~
"255" for A
~
D
0.0.0.0
SNMP IPv6 trap Destination1 AAAA:BBBB:CCCC:DDDD:EEEE:FFFF:GGGG:HHHH
ASCII for 128 bit
Allow "0" ~ "9",
"A"~"F"
for A
~
H
A to H can be omitted.
::
SNMP IPv4 trap Destination2 AAA.BBB.CCC.DDD
Allow "0"
~
"255" for A
~
D
0.0.0.0
SNMP IPv6 trap Destination2 AAAA:BBBB:CCCC:DDDD:EEEE:FFFF:GGGG:HHHH ::