Section02MAINTENANCE
Subsection 01 (PERIODIC INSPECTION CHART)
DESCRIPTION
FREQUENCY
I
: Inspect, verify, clean, adjust, lubricate.
Replace if necessary
C
:Clean
L
: Lubricate
R
: Replace
FIRST
10
HOURS
EVERY
25 HOURS
OR
3MONTHS
EVERY
50 HOURS
OR
6MONTHS
EVER
100 HOURS
OR
1YEAR
ELECTRICAL SYSTEM
Electrical connections and fastening (ignition system,
starting system, fuel injectors etc.)
I I
MPEM and ECM connectors
I(1)
MPEM mounting brackets/fasteners I
Digitally Encoded Security System and safety
lanyard/post
I I
Monitoring beeper I I
Battery and fasteners I I
STEERING SYSTEM
Steering cable I I
O.P.A.S. SYSTEM
O.P.A.S. system including filter (if applicable)
I I(8) I
PROPULSION SYSTEM
Drive shaft corrosion protection L(9)
Drive shaft protection boot I(2)
Drive shaft/impeller splines (GTX 4-TEC Series) L
Drive shaft/impeller splines (RXP 4-TEC models) L
Sacrificial anode I
Shifter system/cable I I
VTS (Variable Trim System, (if so equipped)) I I
Impeller shaft seal, sleeve and O-ring (6)
Impeller and impeller/wear ring clearance I(2)
Water intake grate I(2)
Ride plate including coolant leak I I
Drive shaft/hull sealing system I I
smr2004-Complete Line Up 25